Specifications

YES
NO
Tracks shall be Bridgestone OEM tracks, installed on machine
Tracks must have a minimum width of 17.7”.
Maximum ground pressure of 4.6 PSI
Tractive effort or draw-bar pull to be a minimum of 13,766lbs
The tracks must be tucked into machine, no bolt-on systems will be accepted.
The track contact length must be a minimum of 62.9”.
Minimum track contact area of 1,111 square inches, on the ground
Forged steel mandrills must be imbedded inside track design with continuous
wrapped steel cable with roller pads incorporated in steel mandrills
Tracks must have metal contact plates imbedded in track for rollers
(Tracks with-out this feature will not be accepted)
CAB & SAFETY EQUIPMENT
Operator cab must meet SAE specifications J1040 and J1043 for rollover
protective structure (R.O.P.S.) and falling object protection (F.O.P.S.), and be of
Level II certification.
Cab must be fully enclosed with heat and air conditioning w/replaceable cab air
filter
Cab must be sealed and pressurized to 70 pa, maintain a comfortable operating
environment
Cab must be furnished with a deluxe high back six-way suspension seat w/three
height adjustments and weight adjustment
Hand and foot throttle shall be standard
Front door of cab must be a Poly-carbonite ½ thick impact resistant roll-up door
with a wiper and washer
Roll-up door can be opened regardless of boom attachment position and can be
locked in the open position for operation
Cab must be equipped with a top view window
The top section of the side windows must slide up and down with fixed bottom
side window sections
Rear window must pop out to act as an emergency exit
Operator R.O.P.S/F.O.P.S cab must be capable of rotating backward for
maintenance
Braking: shall be spring applied, hydraulically released, multiple wet friction disc
brakes that automatically engage when lap bar is raised or engine is shut off
Rear halogen work lights must be recessed into rear towers to prevent breakage
Track loader shall have two rear and two front halogen work lights
Loader shall be equipped with two (2) cab mounted rear-view mirrors standard.
Unit must come equipped with rear mirror, mounted on left rear of machine
Seat belt will be provided
Additional operator’s protection shall be provided by a seat bar which shall
prevent lift-arm and tilt operation, auxiliary hydraulics, and activate brakes when in
the up position
Grab handles must be provided to assist the operator with mounting and
dismounting of the loader. (And must be replaceable with no welding bolt on)
The track loader must include a horn and a back-up alarm as standard equipment
The loader shall be painted Red and Gray
Loader shall have a hydraulic quick attach lock and unlock switch in cab
One Roof mounted strobe light, wired to come on automatically with ignition on