Specifications

YES
NO
Loader shall come equipped with a large non-skid safety step
STANDARD FEATURES
Must come with three (3) selectable power modes allow the operator to match the
engine performance to the job
(1)Eco mode can provide up to 15% fuel savings while still offering maximum
torque and good power characteristics
(2)Normal mode offers a good mix of power and economy for general work
approximately 97% of the engine rating
(3)Power mode produces peak engine power for maximum performance
Machine must automatically adjust to throttle setting if wrong mode is chosen
Must come equipped with the following
3-Position Regeneration Switch
1
st
Prohibit Regeneration Mode: (Prevents active regeneration in sensitive
environments)
2
nd
Auto Regeneration Mode: (Allows active regeneration when necessary to
extend the life of the Diesel Particulate Filter (DPF)
3
rd
Manual Regeneration Mode: (Allows the operator to enter into active
regeneration if necessary)
Variable flow auxiliary hydraulics offers three easy to select settings that can be
programmed to match the flow requirements of the attachment
Setting I 100% of Flow
Setting II 0-100% Factory default is 75%
Setting III 0-100% Factory default is 50%
Hydraulic oil temperature warning light added to gauge panel
2
nd
Auxiliary circuit standard on machines equipped with high flow feature
17 gpm – flow independent from primary hydraulics
Controllable from the right hand joystick
Must come equipped with arm float operation allow for easier detent also includes
a status indicator on the gauge panel
Loader must be able to function and work with front cab door open or closed
BUCKET
Minimum width of 80” bucket 24 cu. ft. capacity
Must come with replaceable side cutters
Bucket shall come equipped with a 5/8” thick reversible edge
DIMENSIONS
Length (w/bucket) Minimum 156.9”
Width to outside of tracks Maximum of 6’ 1.2”
Operating Weight Minimum 11,850 lbs.
Bucket Rating Minimum 24 cubic ft. SAE
Ground Clearance Minimum 13.5”
Height to Bucket Pin Minimum 10’ 6.1”
Reach fully raised Minimum 3’ 2.8”
Angle of Departure Minimum 30°
Bucket Rollback at Ground Level Minimum 31.4°
Dump Angle at Full Height Minimum 38.7°
Dump Height Fully Raised Minimum 7’ 11.7”
Overall Height Maximum 7’ 5”
Front Clearance Radius with Bucket Maximum 7’ 11.8”