Specifications

For each item, please place an X in the appropriate space (Yes __ No __ ) to signify whether or not you are in complete
compliance with the specification. Failure to follow the format or answer the specification may cause your bid to be
disqualified. If you need extra space to describe your product, please feel free to attach extra sheets. When doing this,
be sure your description references the appropriate question number. The bidder shall indicate an appropriate response
in EVERY SPACE in the respondents section. This may be a "YES", indicating COMPLETE COMPLIANCE with the
specification, or a DETAILED DESCRIPTION of any and all deviations. If it is necessary to bid alternate equipment or to
take exceptions to the specification as set forth, this must be so stated in your bid
ITEM 1 - A NEW 2014 TIER IV COMPLIANT RUBBER TRACK LOADER SUCH AS THE TAKEUCHI TL10 HIGH-FLOW
OR APPROVED EQUAL. THIS SPECIFICATION IS NOT TO BE INTERPRETED AS RESTRICTIVE BUT RATHER AS
A MEASURE OF THE STANDARDS WHICH ALL OTHER RUBBER TRACK LOADERS SHALL BE MEASURED
YES
NO
ENGINE
Liquid-cooled, turbo-charged Kubota/V3800CRT, common rail injection diesel.
Minimum of four cylinders
92 Gross h.p. minimum @ 2600 r.p.m.
90.7 h.p. Minimum @ 2600 r.p.m.
Engine must be EPA Rating Interim Tier IV
Must have cold weather starting and shall consist of an electric intake manifold
pre-heater
Engine must have a minimum of 230 cu. in. total displacement
A minimum of 247ft. lb. of torque @ 1850 r.p.m.
Dual element air cleaner with Factory installed centrifugal style pre-cleaner
Glow-plugs must be provided as standard equipment.
Must have 12-volt system with minimum 600CCA battery.
Alternator shall be a minimum of 80 amp
Engine must have a minimum of 250 hour oil change intervals.
Must have economy mode selector.
Engine monitoring system standard with auto engine shut-down
Must be equipped with a Diesel Particulate Filter (DPF) is used to help control
particulate
emissions (soot).
Cooled Exhaust Gas Recirculation (CEGR) is used to help reduce NOx
(Oxides of Nitrogen) (Emissions).
Swing-out cooler module place the hydraulic oil cooler and engine coolers
side-by-side for optimal performance.
DRIVE/UNDERCARRIAGE
Hydrostatic drive system, variable piston pumps.
Hydrostatic pump directly coupled to engine via a flex coupler with hydraulic
oil flow to high torque, radial piston hydraulic motors
Hydrostatic pumps must have a maintenance free design such as the flex coupler.
(no belt drive pumps will be accepted).
High-mount sprocket drive design
Steel mandrills must be imbedded inside track design.
Compact Track Loader shall be fitted with permanently welded side frame and
will have structural cross-members integrated in framework.
Must have hydrostatic 2-speed drive, forward & reverse controlled by a switch on
joystick control lever
Carriage has all steel, sealed bearing bottom rollers, five (5) per carriage side.
Must be fully hydrostatic drive system.