Specifications

ITEM NO. 7 – 30 FOOT DUMP TRAILER ALUMINUM BODY
STEEL FRAME
YES
NO
BODY
LENGTH 30’0”
WIDTH 96” WIDE
HEIGHT 54”
END FRAME TO END FLOOR 4” MAXIMUM
TIRE TO END OF BODY 12” MAXIMUM – DUE TO
UNDERRIDE
BODY:
5TH WHEEL HEIGHT 50" Overall Trailer Height: 9' .625"
CAPACITY:
40 CUBIC YARDS
SIDES:
MATERIAL FRONT 3/16" Alum Sheet
MATERIAL REAR 3/16" Alum Sheet
TOP RAIL 9" Extruded Top Rail-Grooved
BOARD I Inverted Angle Height: 0"
SIDE POSTS 5/32" Face Extruded Tapered Side Posts
SIDE POST SPACING 24"
HORIZONTAL BRACES *** NONE ***
FLOOR:
FRONT 1/4" Alum Plate
REAR 3/8" Alum Plate
BULKHEAD:
MATERIAL 1/4" Alum Plate
UNDERSTRUCTURE: TYPE 4" I-BEAM ON 12" CENTERS
LONGITUDINALS 6" X 6" X 3/8" ANGLE
REAR HINGE Standard Rear Body Hinges
TAILGATE:
REAR CORNER POST HGHT 60" Post Height
TYPE TOP OFFSET ALUM
STYLE HORIZONTAL PANEL
SHEET 1/4" Alum Plate
HEIGHT 60 "
SLOPE 0"
NUMBER OF PANELS 3 Panel
APRON 7" Alum Weld-on w/ Light Pan & Mudflaps
CONTROLS Air-gate Frame Manual
GATE SEAL *** NONE ***
ACCESSORIES:
LADDERS D.S.First post outside
LADDERS *** NONE ***
SHOVEL BRACKET Bulkhead, Driver's Side (Al)
TARP RAIL Grooved Tarp Rail, Both Sides
STRIPE *** NONE ***
TARP SYSTEM:
Electric Dump Body Covering System, Aero Industries Easy
Cover Model 575 Or Approved Equal, With A Cab Operated
Rocker Switch.
Length To Be Adequate To Properly Cover The Dump Body.
The Arms Are Powered By (2) Powerpack Spring Assemblies
Mounted On The Side Of The Dump Body.