Specifications

YES
NO
HYDRAULIC SYSTEM
The wheel loader shall employ a dual speed hydraulic system, which
shall be equipped with an oil cooler.
The hydraulic system shall employ a variable displacement type main
pump with a rated output of not less than 47.6 gpm at 2100 engine rpm.
The main hydraulic system relief valve shall be set for a maximum
pressure of 3000 psi.
All hydraulic flow shall pass through a three (3) spool control valve. The
first spool shall feed the steering circuit. A second spool will control flow
to the loader circuits. The third spool shall provide flow for any
attachments, such as a multi-purpose bucket. All necessary piping on the
loader arm shall be provided for the attachment circuit.
The hydraulic system shall be sufficient to provide the following cycle
times:
Raise Boom ................ 6.1 sec.
Lower Boom .............. 3.5 sec.
Dump Bucket ............. 1.9 sec.
Total Cycle ...….......... 11.5 sec.
OPERATOR'S COMPARTMENT
The wheel loader shall have its operator's compartment located on the
rear frame over the articulation joint. The operator's compartment shall
consist of a fully enclosed steel ROPS/FOPS cab. The cab shall be a two
(2) door walk through design with access ladders and handrails on both
sides.
Air Conditioner / Heater / Defroster / Pressurizer
Electrically Heated Rear Window
Front (Intermittent) Wiper & Rear Wiper
Front & Rear Washers
One (1) Internal & Two (2) External Rearview Mirrors
Heated Air Suspension Type Seat
w/3” Retractable Seatbelt
Adjustable Armrests
AM/FM Radio with Speakers and Auxiliary Jack
High Resolution LCD 7” Color Monitor
Rearview Monitoring System (Camera)
Sound Suppression
Tiltable, Telescopic Steering Wheel
Ashtray & Lighter
Two (2) 12V Outlets
Sun Visor
Hot/Cold Storage Box
Floor Mat
INSTRUMENTATION
The wheel loader shall be equipped with an electronic equipment
management and monitoring system which shall include a high resolution
LCD/TFT main and maintenance monitor. The monitors shall include the
following:
Main Monitor