Specifications

YES
NO
OPERATING DIMENSIONS & CAPACITIES
The following operating parameters, which are calculated per SAE J-
732C and J-742B standards, are to be considered minimums for a wheel
loader of this class:
Max. Hinge Pin Height ..................……... 13’2"
Dump Clearance @ Max. Hgt. .............…. 9' 5"
Reach @ Max. Hgt. .......................…….... 3’3”
Reach @ 7' Dump Hgt. ..........……............ 5’3”
Overall Length .........................…………. 25’0”
Breakout Force .............……….............. 36,310#
Tip Load - Straight .............………........ 25,640#
Tip Load - Full Turn ...……................... 21,186#
Operating Weight ....................……....... 33,371#
Note: For purpose of comparison, the above data is based on a machine
equipped with a pin-on bucket.
ADDITIONAL EQUIPMENT
The wheel loader shall be equipped with the following additional
equipment:
Back-up Alarm
Centralized Grease Banks
Std. Counterweight
717 lb. Additional Counterweight
Electric Horn
Electronically Controlled Suspension System (Ride Control)
Lifting Eyes
Full Front & Partial Rear Fenders
Tool Box (In Battery Box)
Vandalism Protection
w/Caplock & Cover for Fuel Tank
Padlocks:
Battery Box; Hydraulic Oil Tank;
Engine Hood Side Panels; Radiator Cap Cover;
Radiator Tank; Transmission Oil Filler Cover
Voltage Converter (5 Amp / 12 Volt)
WIRELESS REMOTE MONITORING SYSTEM
The wheel loader shall be equipped with a satellite-based, remote
wireless monitoring and management system. The system shall be
designed to utilize global positioning satellite technology. The system
shall be designed to be operated by any Windows based PC operating
system using commercially available software. Information shall be
accessed through an internet-based portal, providing e-mail and text
alerts, web dial-up service, and monthly summary reports.
The system shall provide the following machine and operation
information:
Fleet Optimization
Fuel consumption data and trends
Machine fuel level
Machine utilization