Specifications

SECTION

SPECIFICATION DETAIL

COMPLY

YES

PAINT

All raw materials used in the manufacturing process shall be new and

unused and properly coated with an industrial equipment primer and

industrial equipment paint coating.

Keizer-Morris International yellow will be the primary coating color.

RUST PREVENTIVE ABRASION RESISTANT COATING

YES

Asphalt Patcher underside and frame must be coated in Megaflex

Preventive Abrasion Resistant Coating.

Coating must be a one part acrylic base self-priming, thixotropic

semi-paste coating that contains at least 36% highly elastic in water-

dispersed polymers.

Coating must be fluid applied and cure to form a seamless rubber anti-

rust and waterproof coating that can be applied over clean dry

surfaces of other tight coatings. V.O.C. (Volatile Organic Compound)

shall be 0.01 or less.

Coating must be 100% waterproof

Coating must be 100% ultra-violet resistant so as not to break down

as a result of long-term exposure to sunlight

Coating must be capable of 200% elongation so as to completely

prevent cracking due to expansion and contraction as well as dimpling

resulting from impacts

Coating must afford excellent chemical resistance to acids alkalis,

salts and fuels. Coating must be self-extinguishing

Coating must dry to a smooth texture.

Coating dry film thickness shall be 14 mil.

Coatings offered shall have been tested in the following areas

Results shall be in the minimum acceptable to Suffolk County

Test documentation must be available to Suffolk County upon request

Specific Gravity not less than 1.28

Solids by Weight Not less than 67%

Solids by Volume Not less than 57% Spread Rate

400 grams p/sq. meter, per coat at not less than 13 mils.

Dry Time: 30 minutes at 70 degrees F. and 50% relative humidity.