Specifications

YES
NO
The tank will allow for cleaning of two standard asphalt shovels.
UTILITY
HAND TORCH
A 50,000 BTU hand torch with 15’ of hose shall be supplied.
The torch will receive its fuel supply from the existing liquid propane gas
cylinders which supply the fuel to the unit.
The torch to have connections located at the rear of the unit making it
nearest to the normal working area.
3/8” approved quick couplings to be used for easy removal.
(OPTION 4)
A manual lighting procedure will be required for ignition.
On/off flow control type valve shall be attached to the torch.
If this option is selected with the diesel fired burner option, it will be
supplied with a stand-alone thirty pound fuel cylinder.
WARNING
SIGNAL/ARRO
W BAR
(OPTION 5)
Proper wiring and brackets shall be provided for safety marking
equipment.
Arrow warning light bar is switched to allow the user to warn and/or direct
the arrow left, right, bar or left and right. KMI standard is the Soundoff
signal Trafficmaster amber directional board with controller.
Safety beacon light will be switched to allow the user to turn the light on
or off.
The switch location will be in the control panel of the main heating unit.
Specifications must be supplied with purchase order to determine the
correct safety light(s).
LARGER
CAPACITY
LPG
CYLINDERS
(OPTION 6)
Two (2), 100 pound liquid propane gas cylinders will be included on the
unit.
These cylinders will be in lieu of (2) standard thirty pound cylinders.
Safety chains will be supplied to secure the cylinders at all times.
Chains to be permanently attached and are a minimum of 3/16” chain.
NOTE: The heating unit provided offers optimum efficiency and will
effectively operate with fuel supplied from thirty pound LPG cylinders or
greater.
It is suggested by the manufacturer to consider the use of sixty pound
cylinders or smaller for ease of handling by the end user(s).
LOADING
WINCH AND
DAVIT
(OPTION 7)
Manual operated loading winch and davit will be supplied and attached to
the trailer.
The winch shall have a minimum capacity of 1000 lbs.
It will be located at or near the utility area of the trailer in order to aid with
loading and unloading miscellaneous items.
The winch and davit will be maneuverable in a 360 degree motion.
TOOL RACK
(OPTION 8)
The Tool Rack shall be capable of storing up to six (6) implements in an
upright position in the utility area.
The frame is constructed of steel angle iron.
The hotbox/reclaimer body shall be fabricated with an additional heavy
duty channel steel support frame and hydraulic scissor type hoist.
The hoist will be sized to provide a minimum of 150% of the required
lifting capacity.