Specifications

Timer to be prewired into the hotbox thermostat circuit thru a manual
toggle switch.
The timer is to be supplied with a 120 volt, single phase, male receptacle
permanently mounted in the main control panel.
ELECTRICAL
The electrical back up warmer offers the unit the ability to keep mix at
current temperature without the presence of flame or burner run.
The unit utilizes a single phase 220 amp 30 amp triad 5000 watt heating
element.
BACK-UP
WARMER
(OPTION 14)
The controls are housed in a NEMA 4 enclosure and the unit comes
standard with flanged receptacle and plug.
NOTE: A 220 volt 30 amp circuit breaker and appropriate cord are
required but are not supplied.
Should you have need for an option not listed above, please contact us to
discuss your requirements.
PLATE
COMPACTOR
TAMPER
(OPTION 15)
One (1) Multiquip MVC88, as per the following:
Honda GX160 Gase Engine
Hour meter/tach
Sealed Belt Cover
Cob Tooth Belt
Centrifugal Force 3372LBF, 15KN
Exciter Speed
Plate Size: 19.7 x 20.7
Tamper shall have a secure mount for transport on hot box.
SPARE TIRE
AND RIM
(OPTION 16)
Spare Tire and Rim - ST235/80R16 and rim shall be mounted on the
trailer.