Specifications

ITEM NO. 2 - NEW 2014 4000LB. LIFT CAPACITY SKID STEER LOADER SUCH AS THE GEHL
V400 OR APPROVED EQUAL. THIS SPECIFICATION IS NOT TO BE INTERPRETED AS
RESTRICTIVE BUT RATHER AS A MEASURE OF THE STANDARDS WHICH ALL OTHER
RUBBER TRACK LOADERS SHALL BE MEASURED
YES
NO
ENGINE
Cylinders: Minimum of four (4)
Make: Cummins QSB 4.5 Turbo charged liquid cooled diesel engine (Tier III)
Gross Horse Power: Minimum of 99hp @ 2200 R.P.M.
Mechanical Injection Pump and Throttle Linkage:
(2) Throttle levers, (1) Foot pedal operated and (1) Hand operated
Cold Start: Engine must be equipped with an intake grid heater
Displacement: Minimum of 272 cubic inches
Torque: Minimum of 326 ft/lbs @ 1300 R.P.M.
Engine must auto-alert system for low oil pressure and high temp.
DIMENSIONS
Length (Without Attachment): 121.5” maximum
Width (Over Flotation Tires): 79.5” maximum
Height (With Operator Cab): 82” maximum
Operating Weight: 11,140lbs. minimum
Bucket Rating (SAE Heaped) Dirt-Type: 1 cu. yd. minimum
Bucket Width: 84” maximum
Ground Clearance – to chassis: 7.3” minimum
Wheel Base: 54.6” minimum
LOADER ARM DESIGN
Loader arms shall be a vertical lift design
Loader arms shall not be attached to any part of the machines cab.
Loader arms and lift cylinders shall be attached to loaders lower frame only.
Universal coupler shall be electro/hydraulic quick disconnect from seat of machine
PERFORMANCE
Clearance Circle, Front (with Bucket): 88.5” minimum
Height to Bucket Hinge Pin: 144” minimum
Dump reach at Maximum Height: 39.5” minimum
Rollback at Full Height: 100° minimum
Max. Rollback at Ground: 31°
Dump Angle: 31°
Travel Speed – 1
st
Speed: 0-6.5 mph
2-Speed shall be standard equipment 0-11.2 mph
Tipping Capacity – (SAE): 8,000lbs minimum
Rated Operating Load – (SAE) Minimum without
any counterweights: 4,000lbs.
Bucket Break-out Force – Minimum: 9,125lbs.
STANDARD FLUID CAPACITIES
Fuel Tank: Minimum 31.25 gallons
Hydraulic Reservoir: Minimum 16.75 gallons
Engine Oil: Minimum 14.8 quarts
Engine Coolant: Minimum 16 quarts