900-Lumen Portable LED Projector Part #: 21797 User manual
900-Lumen LED Projector Manual Page 2 of 14
900-Lumen LED Projector Manual ! Page 3 of 14 SAFETY WARNINGS AND CAUTIONS WARNING: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture. CAUTION: To reduce the risk of electric shock, do not remove cover or back. No userserviceable parts inside. Refer servicing to qualified personnel. IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS This manual contains important safety and operating instructions for your projector.
900-Lumen LED Projector Manual ! Page 4 of 14 WARNINGS 1. Please read this manual carefully before using your projector. 2. To ensure a stable power supply, use a good supply line and an outlet with grounding. 3. Please use the power supply indicated on the projector and the power cable provided with the projector. 4. Dismantling the projector voids any warranty repair. 5. Do not look at the light source of the projector so as to avoid hurting your eyes. 6. Do not obstruct the vents on the projector. 7.
900-Lumen LED Projector Manual Page 5 of 14 Thank you for your purchase of Sima’s LED Projector! With proper care, we hope that you will get many years of enjoyment from it. Product Features • High-efficiency cooling channel to enhance stability and lifetime. • Long-life LED lamp provides over 20,000 hours of working time, with richer color and detail. • Electronic zooming function and free image size setting. • Free image mode transforms aspect ratio from 16:9 to 4:3. • Light and portable.
900-Lumen LED Projector Manual Page 6 of 14 REMOTE FEATURES: PROJECTOR FEATURES: DETAIL OF VIDEO INPUT Cb/Pb Y Video in FRONT 1 Cr/Pr L Audio R REAR LEFT 2 3 (Your remote may differ than shown here, but the labels should be similar) TOP 4 5 1. Vent 2. Keystone Adjustment 3. Lens/Focus Adjustment 4. 12V DC In 5. 12V DC Out 6. Video Input Panel (see inset) 6 7. 8. 9. 10. 11. 12. 7 8 9 10 11 3.5mm Audio Out Power Button Remote Control IR Sensor VGA In HDMI In Vent 12 1. 2. 3. 4. 5.
900-Lumen LED Projector Manual Page 7 of 14 SETUP: 1. Connect power adapter to the DC-IN jack (do not turn on projector yet) DC-IN 2. Connect external speakers (optional, but recommended) This projector features a built-in DC-OUT (12 Volt) power supply for speakers. Y DC-OUT Cb/Pb Video in 3. Connect to video source Video Source LED Projector (DVD, VCR, computer, etc.) Y Video in Cb/Pb Cr/Pr L Audio R HDMI VGA 4. Power on projector, speakers (if connected) and video source 5.
900-Lumen LED Projector Manual Page 8 of 14 Operations Powering on and off: Once power is supplied to the projector, the indicator light near the power button flashes indicating that the projector is in standby mode. To turn it on, hold the power button for two seconds (or use the power button on the remote). The indicator light will stop flashing and stay lit, showing that the projector is powered on fully.
00-Lumen LED Projector Manual Page 9 of 14 MENU OPERATION: Signal source choosing If your projector does not automatically detect the video input source, press the Input Mode button on the remote control (it may be labeled 'I-mode' or 'Source'), and the menu will appear in the top, left-hand portion of your screen. Press the “Up” or “Down” button to choose the signal source, and press the “Right” button to confirm the signal source.
900-Lumen LED Projector Manual Page 10 of 14 Function Menu After entering the Main Menu, press the "Right" or "Left" buttons on the remote until the "FUNCTION" menu appears. Here you adjust how the screen is displayed, set the sleep function, the display of color and manually select the signal source for the projector. Use the “Up” or “Down” button to choose the item you would like to change, and use the "Right" or "Left" button to adjust.
900-Lumen LED Projector Manual Page 11 of 14 KEYSTONE CORRECTION: In order to display your picture as accurately as possible, you must ensure the projector is aimed directly central to the screen. Otherwise, a 'keystone' effect may occur. You can normalize the image by first ensuring the projector is aimed centrally to the screen, and its beam is perpendicular to the screen, then using the built-in keystone feature.
900-Lumen LED Projector Manual Page 12 of 14 TROUBLESHOOTING: Please refer to the table below for solutions to the most common problems: Trouble Please Check Weak color Ensure the projector's power cable is inserted properly both at the projector and the wall. Ensure the remote control battery is inserted properly. Ensure the input terminals are inserted properly. Check whether the signal source works well. Ensure the input terminals are inserted properly.
900-Lumen LED Projector Manual Page 13 of 14 Sima XL-PRO Projector 12 Month Limited Warranty XL-PRO LCD Projector (excluding LED light source) - 12 month (365 day) Limited Warranty Sima Products Corp.
900-Lumen LED Projector Manual NOTES: Page 14 of 14
