Manual

750 D Reference DAC / CD Transport

____________________________________________________________________________________

Backlight Function

Your FRM-3 features a backlight capability that

allows you to effortlessly operate this remote control

in a darkened environment. Since battery lifespan is

substantially reduced when the backlighting feature

is activated, the FRM-3 includes 3 different

operational modes to help preserve battery life:

Default Mode (#1): The backlight is triggered on by

either moving the remote control (via an internal

motion detector) or by pressing any button on the

remote’s keypad; The backlight will remain

illuminated for a full five (5) seconds after the last

event (motion or pressed button). To activate the

“Default Mode”, press and hold the “CD” button for

three (3) seconds. The backlight will illuminate once,

very briefly for confirmation.

Button Mode (#2): The backlight is triggered ONLY

by pressing any button on the remote’s keypad - the

internal motion detector is deactivated; The

backlight will remain illuminated for a full five (5)

seconds after the last button is pressed. To activate

the “Button Mode”, press and hold the “AMP” button

for three (3) seconds. The backlight will illuminate

twice, very briefly for confirmation.

Off Mode (#3): The backlight feature is completely

disabled. To activate the “Off Mode”, press and hold

the “DAC” button for three (3) seconds. The

backlight will illuminate three times, very briefly for

confirmation.

Remote operation with multiple MOON components

Figure 4: Remote Operation with SimLink™

In figure 4 we have a 180 MiND Music Streamer

connected to a 750D DAC via their respective

SimLink™ ports (using a 1/8” mini-jack cable), and

the 750D connected to a 700i Integrated Amplifier

also via their respective SimLink™ ports. When you

launch the MiND App on your Apple smart device

(full list on the MiND page of our website)

and select

this system’s ZONE, the 180 MiND will turn on, as

will the 750D and 700i; The 700i will automatically

switch to its “MiND” assigned input, as described

previously in the “Software Setup” section. To shut

down the system, press “Off” for this ZONE in the

MiND app.