Instruction Manual

850P Reference Dual-Mono Preamplifier

____________________________________________________________________________________

Unpacking

The MOON 850P preamplifier and power supply/controller should be removed from its crate with care.

The following accessories should be included inside the box with your preamplifier:

AC power cable

‘FRM-3’ Full Function remote control with three ‘AAA’ batteries (USA and Canada only)

Three (3) color-coded cables to connect the 850P preamplifier to it’s power supply/controller chassis

‘SimLink’ cable with 1/8” mini plug terminations on each end

This owner’s manual

Warranty and product registration information (USA and Canada only)

Once the 850P is unpacked, inspect it thoroughly

and report any damage to your dealer immediately.

We suggest that you keep all of the original

packaging, storing it in a safe, dry place in case

you’re required to transport this product. The

customized packaging is specially designed to

protect the 850P from any potential damage during

transit.

Please write the serial number of your new MOON 850P in the space provided below for future reference.

Serial No.: ________________

Installation & Placement

The MOON 850P dual-mono preamplifier is very

heavy and should be placed on a solid, level surface.

You should avoid placing it near a heat source or

inside a closed cabinet that is not well ventilated as

this could compromise the preamplifier’s

performance and reliability.

If the surface you have chosen isn’t perfectly level,

each of the four (4) legs of both your 850P and it’s

power supply / controller are height adjustable;

carefully using your fingers, you can either raise

each leg by turning the cone underneath clockwise,

or lower each leg by turning it counterclockwise.

We strongly recommend that you leave these cones

mounted to the component at all times for reasons

related to both performance and aesthetics.