i-5 Integrated Amplifier ___________________________________________________________________________ Owner’s Manual
MOON i-5 Integrated Amplifier Table of Contents Congratulations........................................... 3 Introduction ............................................... 4 Unpacking and Warnings .............................. 5 Installation Tips ........................................ 6 Front Panel Controls .................................... 7 Rear Panel Connections................................ 9 Operating the i-5 ...................................... 10 Remote Control Operation .................
MOON i-5 Integrated Amplifier Congratulations! Thank you for selecting the MOON i-5 integrated amplifier as a part of your hi-fi reproduction system. This integrated amplifier has been designed to offer state-of-the-art high-end performance in an elegant package, while retaining all the sonic hallmarks on which Simaudio has made its reputation. We have spared no effort to ensure that it is among the finest two-channel integrated amplifiers available.
MOON i-5 Integrated Amplifier Introduction Your MOON i-5 integrated amplifier incorporates many significant design features to achieve its “world class” level of performance. This is an abbreviated list of the more important features: Proprietary “Advanced Renaissance” Technology which eliminates feedback.
MOON i-5 Integrated Amplifier Unpacking and Warning! The MOON i-5 Stereo integrated amplifier should be removed from its box with care.
MOON i-5 Integrated Amplifier Installation Tips The MOON i-5 Stereo integrated amplifier should be placed on a rigid surface to prevent any accidents such as falling over. It is highly recommended that it sits on its own dedicated shelf. This integrated amplifier has side-mounted heat sinks; consequently, it should both be placed in a location with empty space it for proper heat dissipation. You should never place another component on top of this integrated amplifier.
MOON i-5 Integrated Amplifier Front Panel Controls Figure 1: Front panel of Moon i-5 Integrated amplifier The front panel will look similar to Figure 1 (above). The large digital display window indicates the relative gain setting (from ‘0’ to ‘50’) for both the left and right channels. As well, whenever you change the selected input source, it’s number will appear in the window for 3 seconds before reverting back to the gain setting.
MOON i-5 Integrated Amplifier Front Panel Controls (continued) The “Input” selector button allows you to choose which input source you wish to listen to. The MOON i-5 integrated amplifier has five (5) inputs. The A4 input can be configured as a ‘pass-through’ which bypasses the i-5’s gain control section, allowing you to control the gain setting via the connected source component’s own volume control – a home theater processor for example.
MOON i-5 Integrated Amplifier Rear Panel Connections Figure 2: Rear panel of Moon i-5 Stereo Integrated amplifier The rear panel will look similar to Figure 2 (above). There are five (5) pairs of single-ended inputs on RCA connectors labeled CD, A1, A2, A3 and A4. The left channel inputs are located on top and the corresponding right channel inputs are located directly below.
MOON i-5 Integrated Amplifier Operating the i-5 Making the AC Connection 1. Connect the supplied AC power cable to the IEC receptacle, located on the rear panel of the integrated amplifier’s chassis. Alternatively, if you wish, you may use a dedicated high-performance AC cable designed for integrated amplifiers. Ensure that the AC wall outlet you use has a functioning ground.
MOON i-5 Integrated Amplifier Remote Control Operation The MOON i-5 Stereo integrated amplifier uses the ‘SRM’ simple function, all aluminum remote control (figure 3). It operates on the Philips RC-5 communication protocol and is can be used with other Simaudio MOON components such as the P-3 preamplifier and the i-5080 integrated amplifier. The ‘SRM’ remote uses three AAA batteries (included).
MOON i-5 Integrated Amplifier Specifications Configuration ........................................... Power Supply Transformer ........................ Power Supply Capacitance ........................ Class Of Operation - Preamplifier ............... Class Of Operation - Amplifier .................... Single-ended inputs .................................. Input Device Type - Preamplifier ................ Input Sensitivity ...................................... Input Impedance ............................
MOON i-5 Integrated Amplifier Service and Warranty (U.S.A and Canada only) Please take the time to complete and mail the warranty card supplied with your MOON i-5 integrated amplifier. This card is necessary to activate your full warranty, as well as allowing you to receive information on new products and services. Alternatively, you may visit our website www.simaudio.com and go to the “warranty registration” section where you can register on-line.
