Manual
380 D Digital to Analog Converter
____________________________________________________________________________________
7
Unpacking
The Nēo 380D Digital-to-Analog Converter should be removed from its box with care.
The following accessories should be included inside the box with your Digital-to-Analog Converter:
9
AC power cable
9
‘CRM-2’ remote control with two ‘AA’ batteries
9
‘SimLink’ cable with 1/8” mini plug terminations on each end
9
Wi-Fi antenna for “MiND” Music Streamer equipped version of the MOON 380D
9
This owner’s manual
9
Warranty and product registration information (USA and Canada only)
Once the Nēo 380D is unpacked, inspect it
thoroughly and report any damage to your dealer
immediately. We suggest that you keep all of the
original packaging, storing it in a safe, dry place in
case you’re required to transport this product. The
customized packaging is specially designed to
protect the 380D from any potential damage during
transit.
Please write the serial number of your new Nēo 380D in the space provided below for future reference.
Serial No.: ________________
For Nēo
380D’s equipped with the optional
“MiND” Music Streamer, please visit our
website to download PDF versions of both the
“MiND Setup Guide” and “MiND App User
Guide”.
Installation & Placement
The Nēo 380D requires only minimal ventilation to
maintain an optimum and consistent operating
temperature. However, you should avoid placing it
near a heat source as this could compromise the
Digital-to-Analog Converter’s performance and
reliability. As well, it should be placed on a solid
level surface. The 380D uses toroidal transformers;
even though they are well shielded, you should not
place the Digital-to-Analog Converter too close to
source components sensitive to EMI, such as a
turntables.
In the event that your Nēo 380D is equipped with
the “MiND” Music Streamer option and you intend
to use its wireless streaming feature (between your
wireless router and your 380D), you must install the
included Wi-Fi antenna on the back panel by
screwing it into the socket labelled “WIFI ANT”.
If your Nēo 380D is equipped with the DAC
option and you intend to use the USB input
connection (PCM or DSD) with a Windows-
based computer, you will need to install our
USB HD DSD driver, which can be downloaded
from the support section of our website.
Note: Apple-based computers don’t require
this driver.