Owner’s Manual MOON Classic Series W5.
MOON W5.3 Stereo Power Amplifier Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves or another apparatus that produces heat. 9.
MOON W5.3 Stereo Power Amplifier Important Safety Instructions (cont’d) The lightning flash with the arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
MOON W5.3 Stereo Power Amplifier Table of Contents Congratulations ................................................ 5 Unpacking........................................................ 5 Introduction ..................................................... 6 Installation & Placement ................................... 6 Rear Panel Layout ............................................ 7 Connecting the W5.3 ......................................... 8 Balanced Operation ...........................................
MOON W5.3 Stereo Power Amplifier Congratulations! Thank you for selecting the MOON W5.3 Stereo power amplifier as a part of your hi-fi reproduction system. This power amplifier has been designed to offer state-of-the-art high-end performance in an elegant package, while retaining all the sonic hallmarks on which Simaudio has made its reputation. We have spared no effort to ensure that it is among the finest twochannel amplifiers available.
MOON W5.3 Stereo Power Amplifier Introduction Your MOON W5.3 Stereo Power Amplifier incorporates many significant design features to achieve its “world-class” level of performance. This is an abbreviated list of the more important features: Proprietary “Advanced Rennaisance” Technology which eliminates feedback.
MOON W5.3 Stereo Power Amplifier Rear Panel Layout Figure 1: Rear panel of Moon W5.3 Stereo Amplifier The rear panel will look similar to Figure 1 (above). Each channel has one balanced (differential) input on an XLR connector and one unbalanced (single-ended) input on a RCA connector. There is no switch to toggle from balanced mode to singleended mode. You may operate the amplifier in either mode, but only one mode at one time for each channel.
MOON W5.3 Stereo Power Amplifier Connecting the W5.3 Prior to making any connections or removing the XLR jumpers, the power amplifier must be turned off and the AC cable disconnected for at least 1 minute. 1. Connect the input cables running from your preamplifier’s outputs, whether balanced or single-ended, to the amplifier’ s XLR or RCA inputs respectively. We highly recommend that you use the balanced XLR inputs (provided that your preamplifier has balanced outputs) to take full advantage of MOON W5.
MOON W5.3 Stereo Power Amplifier Bridged-Mono Operation Figure 3: Bridged-Mono operation of the MOON W5.3 Stereo Amplifier In the event that you wish to operate the MOON W5.3 Stereo Power Amplifier as a monoblock amplifier, it can be converted to bridged mode without any complex modifications. Only a Simaudio XLR-BRIDGE Y-cable is required. This custom cable will allow one input signal to be sent to both channels of the amplifier’s inputs, as pictured above in Figure 3.
MOON W5.3 Stereo Power Amplifier Operating the W5.3 We recommend that you leave your MOON W5.3 Stereo power amplifier powered up at all times to maintain optimal performance. In the event that you plan to be away from your home for a few days, powering off the amplifier may not be a bad idea. Once fully “broken-in”, please keep in mind that your W5.3 will require several hours of playing time before it reaches its peak performance after you’ve powered it up again. Turning on your MOON W5.
MOON W5.3 Stereo Power Amplifier Custom Installation 12 Volt Remote Trigger The “12 Volt Remote Trigger” can turn the MOON W5.3 Stereo Power Amplifier on or off by a hard wired remote connected to its input. When correctly installed, the system allows the use of both the trigger and the push button to turn the W5.3 on or off. Please note that the main rocker power switch must be left on at all times to allow for the use of the 12 Volt trigger. When the W5.
MOON W5.3 Stereo Power Amplifier Specifications Configuration ......................................................... Power Supply Transformer ...................................... Power Supply Capacitance ...................................... Class Of Operation ................................................. Design .................................................................... Input Impedance ................................................... Input Sensitivity ................................
