User's Guide

P/N R63314 v1.08c
Page | 14
b) USB Connected – The red LED will blink continuously while the
Alert Monitor is connected to the computer via a USB cable and
the software is running to indicate that the Alert Monitor is
connected to a PC via USB 2.0.
Note: While connected, the Alert Monitor wireless radio does
not operate except for configuration functions. Therefore, the
Alert Monitor does not communicate with Player Units or
receive Alerts while connected.
c) Polling Player Units (Normal Operation) - When the Alert Monitor
is turned on the green LED blinks rapidly for ten seconds.
Following this startup period, the green LED will cycle on for two
seconds and then off for eight seconds, indicating normal
operation.
7) Power Button
a) On - Press to power on the Alert
Monitor.
b) Off - Press and hold until
backlight turns off (about two
seconds) to power off.
8) USB Port Cover - open to access the
USB port and charge the batteries or
interface with the ISPM software.