User's Manual
Table Of Contents
- Contents
- Table Index
- Revision History
- 1Introduction
- 2Package Information
- 3Interface Application
- 4RF Specifications
- 5Electrical Specifications
- 6SMT Production Guide
- 7Packaging
- Appendix
Smart Machine Smart Decision
SIM7600SA_User Manual_V1.00 2017-10-11
Table 17: NETLIGHT pin status
NETLIGHT pin status
Module status
Always On
Searching Network; Call Connect(include VOLTE,SRLTE)
200ms ON, 200ms OFF
Data Transmit; 4G registered;
800ms ON, 800ms OFF
2G/3G registered network
OFF
Power off ;Sleep
Note: NETLIGHT output low level as “OFF”, and high level as “ON”.
3.12 Flight Mode Control
The FLIGHTMODE pin can be used to control SIM7600SA to enter or exit the Flight mode. In
Flight mode, the RF circuit is closed to prevent interference with other equipments and minimize
current consumption. Bidirectional ESD protection component is suggested to add on
FLIGHTMODE pin, its reference circuit is shown in the following figure.
Figure 28: Flight mode switch reference circuit
Table 18: FLIGHTMODE pin status
FLIGHTMODE pin status
Module operation
Input Low Level
Flight Mode: RF is closed
Input High Level
AT+CFUN=0: RF is closed
AT+CFUN=1:RF is working