User's Manual

Smart Machine Smart Decision
SIM7600SA_User Manual_V1.00 2017-10-11
E. INTEGRATION INSTRUCTIONS
1.1 List of applicable FCC rules
FCC Rule Part 22H，FCC Rule Part 24Eand FCC Rule Part 27.
1.2 Summarize the specific operational use conditions
None.
1.3 Limited module procedures
None.
1.4 Trace antenna designs
Refer to sections 4.2 and 4.3.
1.5 RF exposure considerations
For the product,under normal use condition is at least 20cm away from the body
of the user,the uer must keeping at least 20cm distance to the product.
1.6 Antennas
GSM/UMTS/LTE main antenna,UMTS/LTE auxiliary antenna and GNSS antenna.
Antennas type：monopole
1.7 Label and compliance information
If the host is marketed so that end users do not have straight forward commonly
used methods for access to remove the module so that the FCC ID of the module
is visible; then an additional permanent label referring to the enclosed module:
Contains Transmitter Module FCC ID: 2AJYU-8PYA002
1.8 Information on test modes and additional testing requirements
Refer to sections 5.3.
1.9 Additional testing, Part 15 Subpart B disclaimer
The module only complies with the FCC Rule Part 22H，FCC Rule Part 24E and FCC
Rule Part 27.If the module is installed in the host device, the host manufacturer
is responsible for the compliance to any other FCC rules that apply to the host
not covered by the modular transmitter grant of certification. For example, if
the host manufacturer markets their product as being Part 15 Subpart B compliant
(when it also contains unintentional-radiator digital circuity), then the host
manufacturer shall provide a notice stating that the final host product still
requires Part 15 Subpart B compliance testing with the modular transmitter
installed.