User's Manual

Smart Machine Smart Decision
SIM7600SA-H_User Manual_V1.00 2017-10-11
Document Title
SIM7600SA-H_User Manual
Version
1.00
Date
2017-10-11
Status
Released
Document Control ID
SIM7600SA-H_User Manual_V1.00
RF Exposure Statement:
For the product,under normal use condition is at least 20cm away from the b ody of the user,the
user must keeping at least 20cm distance to the product.
General Notes
There are no restrictions of use SIM7600SA-H module.
Note that the module was assessed for use with cables of less than 3m length and not for use in
automotive environments. For RF Exposure, the module was assessed for use at more than 20 cm
from the body. When installing this module permanently into a host product to create a new Radio
Equipment Directive device; the manufacturer responsible for the final product must assess if the
combination of this module and the host equipment complies with the essential requirements of the
RE Directive 2014/53/EU.”
SIMCom offers this information as a service to its customers to support the application and
engineering efforts that use the products designed by SIMCom. The information provided is based
on the requirements specifically from the customers. SIMCom has not undertaken any independent
search for additional relevant information, including any information that may be in the customer’s
possession. Furthermore, the system validation of the product designed by SIMCom within a larger
electronic system remains the responsibility of the customer or the customer’s system integrator.
All specifications supplied herein are subject to change without notice.
Copyright
This document contains the proprietary technical information which is the property of SIMCom
Limited, copying of this document, giving it to others, the using or communication of the contents
thereof are forbidden without the official authority by SIMCom. Offenders are liable to the
payment of the damages. All rights are reserved in the event of grant of a patent or the registration
of a utility model or design. All specifications supplied herein are subject to change without notice
Copyright © SIMCom Wireless Solutions Co., Ltd. 2017
Compliance Information
FCC Compliance Statement: This device complies the FCC Rules . Operation is subject to the following two conditions: 1. This device may
not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired
operation. This device must accept any interference received, including interference that may cause undesired operation. Product that is a
radio transmitter is labeled with FCC ID.
FCC Caution:
(1)Exposure to Radio Frequency Radiation. This equipment must be installed and operated in accordance with provided instructions and
the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be
collocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna
installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
(2) Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the
equipment.
(3) This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
(4) Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to
operate the equipment.
(5) the modules FCC ID is not visible when installed in the host, or
(6) if the host is marketed so that end users do not have straight forward commonly used methods for access to remove the module so that
the FCC ID of the module is visible; then an additional permanent label referring to the enclosed module: Contains Transmitter Module
FCC ID: 2AJYU-8PYA002