Specifications

SIM6600-M2 Hardware Design V1.00
www.simcom.com
10
/
54
1.3 Functional Overview
Table 2: General features
Feature Implementation
Power supply
VBAT:3.135～4.4V
Typical supply voltage: 3.7V
Power consumption Current in sleep mode : <5mA
Radio frequency bands Please refer to the table 1
Transmitting power
WCDMA power class: 3 (0.25W)
LTE power class: 3 (0.25W)
Data Transmission
Throughput
UMTS R99 speed: 384 kbps DL/UL
HSPA+: 5.76 Mbps(UL), 42 Mbps(DL)
FDD-LTE :Max 300Mbps (DL Category7), 150Mbps (UL Category 13)
TDD-LTE :Max 200Mbps (DL Category7), 84Mbps (UL Category 13)
Antenna
WCDMA/LTE main antenna.
LTE diversity antenna
SMS
MT, MO, CB, Text and PDU mode
SMS storage: USIM card or ME(default)
Transmission of SMS alternatively over CS or PS.
USIM interface Support identity card: 1.8V/ 3V
USIM application
toolkit
Support SAT class 3, GSM 11.14 Release 98
Support USAT
Phonebook
management
Support phonebook types: DC,MC,RC,SM,ME,FD,ON,LD,EN
Digital Audio feature
One I2S interface with dedicated main-clock for primary digital audio, the
I2S also can be configured as PCM

Half Rate (ETS 06.20)

Full Rate (ETS 06.10)

MCLK frequency: 12.288MHz (default)

Enhanced Full Rate (ETS 06.50 / 06.60 / 06.80)

WCDMA AMR-NB

VoLTE AMR-WB

Echo Cancellation

Noise Suppression
UART interface
UART:

Baud rate: 300bps to 921600bps(default:115200bps)

Can be used as the AT commands or data stream channel

Multiplex ability according to GSM 07.10 Multiplexer Protocol

Could be configured as GPIOs.
I2C interface
I2C:

Apply to the “I2C Specification, version 3.0”

Clock up to 400Kbps