Specifications

SIM6600-M2 Hardware Design V1.00
www.simcom.com
33
/
54
3.14ANTCTRL interface
ANTCTL[0:3] are used for tunable antenna control and should be routed to anappropriate antenna control
circuitry.
The following table are the definitions for antenn control interfaces.
Table 22: Definition of antenna control interface
Pin Name Pin No.
Electrical
Description
Description Comments
A
NTCTL0 59 DO Antenna tuner control0
1.8V voltage domain.I
f
unused,please keep open
A
NTCTL1 61 DO Antenna tuner control1
A
NTCTL2 58 DO Antenna tuner control2
A
NTCTL3 56 DO Antenna tuner control3
This function is under development,for details please contact SIMCom support teams.
3.15W_DISABLE2#
The W_DISABLE2# pin controls SIM6600-M2 to disable the GNSS function.When the W_DISABLE2#
signal is pulled to low level, the GNSS function would be disabled. SIM6600-M2 have no GNSS
function,this pin is reserved.
NOTE