Specifications
Table Of Contents
- 1 Introduction
- 2 Package Information
- 3 Interface Application
- 4 Antenna Interfaces
- 5 Electrical Specifications
- 6 Appearance
- 7 Packaging
- 8 Appendix
SIM6600-M2 Hardware Design V1.00
www.simcom.com
36
/
54
Shows the RF connector dimension in the following figure:
Figure 21: Antenna connector
The major specifications of the RF connector as below:
Table 26: the major specifications of the RF connector
Item Specification
Nominal Frequency Range DC to 6 GHz
Nominal Impedance 50Ω
Temperature Rating
-40℃ to + 85℃
Initial Contact Resistance
(without conductor resistance)
Center contact 20.0mΩmax.
Outer contact 20.0mΩmax.
Voltage Standing Wave Ratio (V.S.W.R.)
Meet the requirements of
1.3max.(DC∼3GHz)
1.45max.(3GHz∼6GHz)
There are two kinds of coaxial cables mating the RF connector in the SIM6600-M2, SIMCom recommend
use Murata and SUZHOU KELI, and the Part Number is MXFR32HP1000 of the Murata and KLC-2058 of
the KELI.