Specifications

SIM6600-M2 Hardware Design V1.00
www.simcom.com
37
/
54
5 Electrical Specifications
5.1 Absolute maximum ratings
Absolute maximum rating for digital and analog pins of Module are listed in the following table:
Table 27:Absolute maximum ratings
Parameter Min. Typ. Max. Unit
Voltage at VBAT pins -0.3 - 4.7 V
Voltage at digital pins (GPIO,I2C,UART, I2S) -0.3 - 2.1 V
Voltage at digital pins (UIM) -0.3 - 3.05 V
Voltage at FULL_CARD_POWER_OFF# -0.3 - 4.7
Voltage at RESET# -0.3 - 2.1
5.2 Operating conditions
Table 28: Recommended operating ratings
Parameter Min. Typ. Max. Unit
Voltage at VBAT 3.135 3.7 4.4 V
Table 29: 1.8V Digital I/O characteristics*
Parameter Description Min. Typ. Max. Unit
V
IH
High-level input voltage 1.17 1.8 2.1 V
V
IL
Low-level input voltage -0.3 0 0.63 V
V
OH
High-level output voltage 1.35 - 1.8 V
V
OL
Low-level output voltage 0 - 0.45 V
I
OH
High-level output current(no pull
down resistor)
- TBD - mA
I
OL
Low-level output current(no pull
up resistor)
- TBD - mA
I
IH
Input high leakage current (no
pull down resistor)
- - TBD uA