User's Manual
Table Of Contents
- RF Exposure Statement:
- General Notes
- Copyright
- Contents
- Table Index
- Figure Index
- Revision History
- 1Introduction
- 2Package Information
- 3Interface Application
- 3.1Power Supply
- Figure 5: VBAT voltage drop during burst emission
- 3.1.1Power Supply Design Guide
- Figure 6: Power supply application circuit
- Table 7: Recommended Zener diode list
- 3.1.2Recommended Power Supply Circuit
- Figure 7: Linear regulator reference circuit
- Figure 8: Switching mode power supply reference ci
- 3.1.3Voltage Monitor
- 3.2Power on/Power off/Reset Function
- 3.3UART Interface
- 3.4USB Interface
- 3.5USIM Interface
- 3.6PCM Interface
- 3.7SD Interface
- 3.8I2C Interface
- 3.9SDIO Interface
- 3.10SPI Interface
- 3.11Network status
- 3.12Flight Mode Control
- Switch
- 3.1Power Supply
- 4RF Specifications
- 5Electrical Specifications
- 6SMT Production Guide
- 7Packaging
- Appendix
SIM7600SA-H_User Manual_V1.00
2017-10-11
Smart Machine Smart Decision
4 RF Specifications
4.1 GSM/UMTS/LTE RF Specifications
Table 22: Conducted transmission power
Frequency
Power
Min.
GSM850
33dBm ±2dB
5dBm ± 5dB
EGSM900
33dBm ±2dB
5dBm ± 5dB
GSM850 (8-PSK)
27dBm ±3dB
5dBm ± 5dB
PCS1900 (8-PSK)
26dBm +3/-4dB
0dBm ±5dB
WCDMA B2
24dBm +1/-3dB
<-50dBm
WCDMA B5
24dBm +1/-3dB
<-50dBm
LTE-FDD B2
23dBm +/-2.7dB
<-40dBm
LTE-FDD B4
23dBm +/-2.7dB
<-40dBm
LTE-FDD B5
23dBm +/-2.7dB
<-40dBm
LTE-FDD B8
23dBm +/-2.7dB
<-40dBm
LTE-FDD B28
23dBm +/-2.7dB
<-40dBm
LTE-FDD B66
23dBm +/-2.7dB
<-40dBm
Table 23: Operating frequencies
Frequency
Receiving
Transmission
GSM850
869~894MHz
824~849 MHz
PCS1900
1930~1990 MHz
1850~1910 MHz
WCDMA B2
1930~1990 MHz
1850~1910 MHz
WCDMA B5
869~894 MHz
824~849 MHz
The LTE Operating frequencies are shown in the following table 24.
Note: GPS
1574.4 ~1576.44 MHz
-
GLONASS
1598 ~1606 MHz
-
BD
1559 ~1563 MHz
Table 24: E-UTRA operating bands