Specifications

Smart Machine Smart Decision
SIM7600G_SIM7600G-H_Hardware Design _V1.01 34 2019-10-21
3.7 USIM Interface
MODULE supports both 1.8V and 3.0V USIM Cards.
Table 12: USIM electronic characteristic in 1.8V mode (USIM_VDD=1.8V)
Symbol Parameter Min. Typ. Max. Unit
USIM_
VDD
LDO power output voltage
1.75 1.8 1.95 V
V
IH
High-level input voltage
0.65*USIM_VDD - USIM_VDD +0.3 V
V
IL
Low-level input voltage
-0.3 0 0.35*USIM_VDD V
V
OH
High-level output voltage
USIM_VDD -0.45 - USIM_VDD V
V
OL
Low-level output voltage
0 0 0.45 V
Table 123: USIM electronic characteristic 3.0V mode (USIM_VDD=2.95V)
Symbol Parameter
Min. Typ. Max. Unit
USIM_
VDD
LDO power output voltage
2.75 2.95 3.05 V
V
IH
High-level input voltage
0.65*USIM_VDD - USIM_VDD +0.3 V
V
IL
Low-level input voltage
-0.3 0 0.25*USIM_VDD V
V
OH
High-level output voltage
USIM_VDD -0.45 - USIM_VDD V
V
OL
Low-level output voltage
0 0 0.45 V
3.7.1 USIM Application Guide
It is recommended to use an ESD protection component such as ESDA6V1W5 produced by ST
(www.st.com ) or SMF15C produced by ON SEMI (www.onsemi.com ). Note that the USIM
peripheral circuit should be close to the USIM card socket. The following figure shows the 6-pin
SIM card holder reference circuit.