User's Manual
Table Of Contents
- Version History
- Contents
- Table Index
- Figure Index
- 1Introduction
- 2 Package Information
- 3 Interface Application
- 4 RF Specifications
- 5 Electrical Specification
- 6 SMT Production Guide
- 7 Packaging
- 8 Appendix
SIM7600G-H User manual
www.simcom.com
28
/
75
Table 7: Recommended TVS list
No.
Manufacturer
Part Number
Power dissipation
Package
1
JCET
ESDBW5V0A1
5V
DFN1006-2L
2
WAYON
WS05DPF-B
5V
DFN1006-2L
3
WILLSEMI
ESD5611N
5V
DFN1006-2L
4
WILLSEMI
ESD56151W05
5V
SOD-323
5*
PRISEMI
PESDHC2FD4V5BH
4.5V
DFN1006-2L
6*
WAYON
WS4.5DPV
4.5V
DFN1610-2L
If user chooses TVS, please pay attention to Clamping Voltage in your datasheet . For example when
the surge input is 100V,the Clamping Voltage is less than 10V.
*If vbat is higher than 3.8V, do not choose NO. 5 and NO. 6.
3.1.2 Recommended Power Supply Circuit
It is recommended that a switching mode power supply or a linear regulator power supply is used. It is
important to make sure that all the components used in the power supply circuit can resist a peak current up
to 2A.
The following figure shows the linear regulator reference circuit with 5V input and 3.8V output.
Figure 7: Linear regulator reference circuit
If there is a big voltage difference between input and output for VBAT power supply, or the efficiency is
NOTE