User's Manual
Table Of Contents
- Version History
- Contents
- Table Index
- Figure Index
- 1Introduction
- 2 Package Information
- 3 Interface Application
- 4 RF Specifications
- 5 Electrical Specification
- 6 SMT Production Guide
- 7 Packaging
- 8 Appendix
SIM7600G-H User manual
www.simcom.com
47
/
75
Figure 30: eMMC reference circuit
For the current of VCC_eMMC and VCCQ_1V8, users should better refer to the related datasheet of
eMMC which is used. The listed current of 500mA and 300mA are just for your reference.
SD/MMC/eMMC card layout guide lines:
● Protect SD card signals from noisy signals (clocks, SMPS, etc.).
● Up to 200 MHz clock rate, 50 Ω nominal, ±10% trace impedance
● CLK to DATA/CMD length matching < 1 mm
● Total routing length < 50 mm
● Spacing to all other signals = 2x line width
● Bus capacitance < 10 pF
3.10 I2C Interface
MODULE provides a I2C interface compatible with I2C specification, version 5.0, with clock rate up to 400
kbps. Its operation voltage is 1.8V.
The following figure shows the I2C bus reference design.
NOTE