Specifications

GT300 @Track Air Interface Protocol
- 41 -
4.2.2 Report Information Periodically
The backend server can configure the terminal to report information periodically by AT+GTBEI
command. The parameter <info report> is used to configure the reporting period, and the unit is
minute.
Example:
The following is an example of this function: AT+GTBEI=gt300,,,0,80,2,0,10,116.228.221.61
,7003,,,0,0001
This command configures the terminal to periodically report information every 2 minutes.
The command is accepted by the terminal when the backend server receives the following
message:
+ACK:GTBEI,135790246811220,0001,20090112104725,000A,0102070202
The terminal then periodically reports the information (ICCID, GSM signal level, battery level,
the status of charger, Time and Date menu status, offset of time zone and the daylight saving
setting) by message +RESP:GTINF. The following is an example of a report message:
+RESP:GTINF,135790246811220,898600120907F6015733,16,0,91,0,1,+8.00,0,20090101000000
,11F0,0102070202
898600120907F6015733: <ICCID>
16: <rssi>
0: <ber>
91: <battery level>
0: <charger connected>
1: <hide time menu>
+8.00: <offset of time zone>
0: <daylight saving>