Hardware Design V1.00
Table Of Contents
- Version History
- 1. Introduction
- 2. SIM2000S Overview
- 3. Package Information
- 4. Application Interface
- 4.1. Power Supply
- 4.2. Power on/down Scenarios
- 4.3. Power Saving Mode
- 4.4. Serial Port and Debug Interface
- 4.5. RI behaviors
- 4.6. Audio Interfaces
- 4.7. RUIM Card Interface
- 4.8. PCM Interface
- 4.9. Keypad Interface
- 4.10. I2C Bus
- 4.11. General Purpose Input/Output (GPIO)
- 4.12. ADC
- 4.13. PWM
- 4.14. Network Status Indication
- 4.15. NETLIGHT Multiplexing Function
- 4.16. Operating Status Indication
- 4.17. Antenna Interface
- 5. PCB Layout
- 6. Electrical, Reliability and Radio Characteristics
- 7. Manufacturing
- 8. Appendix
Smart Machine Smart Decision
http://www.amphenol.com for more information about the holder.
Figure 27: Amphenol C707 10M006 5122 RUIM card holder
Table 18: Pin description (Amphenol RUIM card holder)
Pin name Signal Description
C1 RUIM_VDD RUIM card power supply
C2 RUIM_RST RUIM card reset
C3 RUIM_CLK RUIM card clock
C5 GND Connect to GND
C6 VPP Not connect
C7 RUIM_DATA RUIM card data I/O
4.8. PCM Interface
SIM2000S provides a hardware PCM interface:
Table 19: PCM Pin definition
Pin name Pin number Description
PCMCLK 11 PCM clock
PCMIN 12 PCM data input
PCMOUT 13 PCM data output
PCMSYNC 14 PCM synchrony
SIM2000S_Hardware_Design_V1.00 34 2014-02-27