User manual

SD7K
www.simmonsdrums.net
15
In song source selection page, the LED will show the current selected song source.
There are two choices: “LoC” for local machine (50 internal songs, default setting) or “EtN”
for controlling an external sequencer connected to the MIDI Out of the SD7K using MIDI Clock.
See the MIDI section of the manual for details.
Use the [+] and [-] to select the song source. Song playing will stop immediately when switching
song source.
When External is selected, press [START/STOP] to start or stop the external
sequencer with corresponding MIDI real-time messages. The internal song will not playback.
NOTE: If external sequencer is selected as current song source, the menu pages of
song number, accompaniment volume and drum volume will be not selectable.
Press the [TEMPO+] or [TEMPO-] buttons to display the current tempo.
Use [TEMPO+] and [TEMPO-] buttons to adjust the tempo.
Press both [TEMPO+] and [TEMPO-] buttons at the same time to reset
the current tempo to its default value for the current song. (This function is
not available when external song is selected.)
If there’s no operation, SD7K will return to the previous menu page
automatically after 2 seconds.
song source
song tempo
Accompaniment volume
drum volume
Press the [SONG] button until the LED display shows “Axx” (xx = accompaniment
volume, 0 ~ 32).
Use the [+] and [-] buttons to adjust the song’s accompaniment volume (all instruments
except the drum part). It will be restored to default value on the next power on.
Press the [SONG] button until the LED display shows “dxx”
(xx = drums part volume, 0 ~ 32).
Use the [+] and [-] buttons to adjust the song’s drum volume.
It will be restored to default value on the next power on.