User's Manual

User Manual of CPE-0001
-11-
LED
STATE
FUNCTION
POWER
On
Device power on
Off
Device power off
2.4G
On
The 2.4GHz Wi-Fi is activated.
Flash
Device is transmitting data wirelessly over 2.4GHz.
Off
The 2.4GHz Wi-Fi is disabled.
5.8G
On
The 5.8GHz Wi-Fi is activated.
Flash
Device is transmitting data wirelessly over 5.8GHz.
Off
The 5.8GHz Wi-Fi is disabled.
LTE
On
LTE is connected
Flash
LTE is connecting to the internet
Off
Both SIM not working
LAN1-4
On
Link is established.
Flash
Packets are transmitting or receiving.
Off
LAN port is not connected.
WAN
On
Link is established.
Flash
Packets are transmitting or receiving.
Off
WAN port is not connected.
Signal LED
1 LED
LTE signal is weak
2 LED
LTE signal is fine
3 LED
LTE signal is good
VSIM Indicator
On
VSIM works fine
Off
VSIM doesn’t work(out of service)
WPS LED
Flash
WPS is triggered
Off
WPS is connected or disable
Table 2-1 LED Indications
2.1.3 RearPanel
The rear panel provides the physical connectors connected to the power adapter and any other network device.
Figure 2-1-3shows the rear panel of the CPE-0001.