User's Manual

SDM630 DMR TIER II – OPERATING INSTRUCTIONS

4.2.11 Stored Calls

This screen displays the received individual call records one by one, starting with the most

recently received call record.

Either the name of the caller from the phone book or the user ID is displayed if the ID is not

known to the phone book. If stored calls are empty, NO RECORD is displayed.

The ▼ and ▲ keys can be used to step through the stored calls. An error beep will sound if

there are no more call records.

A “Reset” function key press (if configured), takes the radio back to the default screen

display.

The “Menu” or “Back” key returns to Menu screen. When “OK” key is pressed, a pop up

menu is displayed so that the message can be deleted or party called back.

The selections are:

• DELETE – to delete the call record.

• CALL – to call back the caller (set individual call to the caller)

•

CANCEL – to cancel the action selection.

The selection is made with the▼ and ▲ keys.

The “Menu” or “Back” key returns to Stored Calls screen”.

A “Reset” function key press (if configured) takes the radio back to the default screen display.

If “DELETE” is selected, pressing “OK” removes the selected call record (being viewed) from

the list. The radio returns to the Stored Calls Screen with the next record being displayed.

If “CANCEL” is selected, the Stored Calls screen is displayed.

If “

CALL

” is selected, pressing “

” sets the radio to individual calling mode with the ID of

the stored call. A subsequent PTT within the configured time interval will send an individual

call to the ID of the stored call.