User's Manual

SDM630 DMR TIER II – OPERATING INSTRUCTIONS

• United States Federal Communications Commission, Code of Federal Regulations; 47CFR

part 2 sub-part J

•

American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers

(IEEE) C95. 1-1992

• Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition

•

Industry Canada RSS-102

RF Exposure Compliance and Control Guidelines and Operating Instructions

To control exposure to yourself and others and ensure compliance with the Occupational/ Controlled

environment exposure limits always adhere to the following procedures.

Guidelines:

•

User awareness instructions should accompany the device when transferred to other users.

• Do not use this device if the operational requirements described herein are not met.

Instructions:

•

Transmit no more than the rated duty factor of 50% of the time. To transmit (talk), push the

Push-To-Talk button. To receive calls, release the PTT button. Transmitting 50% of the time,

or less, is important because this radio generates measurable RF energy exposure only when

transmitting (in terms of measuring for standards compliance).

• Transmit only when people outside the vehicle are at least the recommended minimum lateral

distance away, as shown in Tables 1 and 2, from a properly installed according to installation

instructions, externally-mounted antenna.

NOTES:

Table 1a) lists the recommended minimum lateral distance for bystanders in an uncontrolled

environment from the transmitting antenna for the SDM600AC (150MHz-174MHz) mobile rated power

(25 watts) installed in a vehicle. Table 1b) lists the recommended minimum lateral distance for

occupational/ controlled use.

Table 2a) lists the recommended minimum lateral distance for bystanders in an uncontrolled

environment from the transmitting antenna for the SDM600TU and SDM600UW (406.1MHz-512MHz)

mobile rated power (25 watts) installed in a vehicle. Table 2b) lists the recommended minimum lateral

distance for occupational/ controlled use.