User's Manual

SRM9022 ~ PMR MOBILE RADIO USER GUIDE

4.2 PHONEBOOK SCREEN

The Phonebook lists the Radio Users and their selcall

codes. Selcall Identity information is stored for

various users and calls can be sent from this Screen.

The and buttons scroll through the Phonebook

entries.

Pressing the OK button will place a call to the displayed identity.

Alternatively, if the Identity Number is known, the Keypad can be used to enter the

number, which is sent when the OK button is pressed.

The F6 button will backspace through keypad entered numbers, or it will exit back to

the Idle Screen if none.

The Back button returns you to the Menu Select Screen.

Refer to section 6.1.6 for details on Phonebook sub-menus.

Notes:: 1. If the Selcall requires a Status to be included then the Saved-Status-Value

will be used. (See description of Status below.)

2 . The Identity shown on the display when this Screen is exited may be

referenced from other Menu Screens and is called the Current-Phonebook-

Entry.

4.3 STATUS SCREEN

The Status Screen is used to send short pre-programmed messages, eg. “at lunch” ,

“job complete” and so on.

This Screen can only be accessed if Selcall is used.

The Selcall Status is selected here and can be sent

from this Screen.

The

and buttons scroll through the Status List

entries.

Pressing the OK button will send the displayed Status to the Current-Phonebook-

Entry.

Alternatively, if the Status Number is known, the Keypad can be used to enter the

number, which is sent (to Current-Phonebook-Entry) when the OK button is pressed.

The F6 button will backspace through keypad entered numbers, or it will exit back to

the Idle Screen if none.

The Back button returns you to the Menu Select Screen.

Notes: 1. When a Status is sent, it becomes the current Saved-Status-Value, and can be

used at a later time from other Menu Screens.