User's Manual

SRM9022 ~ PMR MOBILE RADIO USER GUIDE

2. The Saved-Status-Value can also be set from the Channel or Phonebook

Screens by entering the number (from the Keypad) and pressing the * button. The

value is saved but not sent.

4.4 SEND MESSAGE SCREEN

This Screen allows the user to send a free-form text

message to another radio user in a similar manner to

a cellphone “SMS”.

After selecting the Send Message menu option with

the OK button, a flashing cursor will appear on the

lower LHS of the screen. The line above the flashing

cursor shows the current cursor location.

Each key is labelled with up to 4 text characters. The

text characters are entered by pressing the keypad -

once for the first character, twice for the second, and

three times for the third, and so on.

Note: The key can be used to display up to 28

characters.

After a short delay, the cursor will advance to the

next character entry.

To move the cursor left or right, use the and

buttons.

To delete a character, move the cursor over the

character, then press the F6 function.

A total of 237 characters may be entered.

When the message is complete, press the OK button to send it. The screen will then

ask for the address to send it to with “Enter No.”. Enter the data address and then

press OK. The message will be sent.

After the message is sent, the display will indicate whether the message delivery was

successful.