User's Manual

SRM9022 ~ PMR MOBILE RADIO USER GUIDE

While listening on the channel, the User can PTT on that channel. After the signal

disappears (or Microphone is placed back in Cradle) the radio will remain listening on

the channel for a short time before resuming scanning.

The Microphone may need to be in cradle for the radio to scan. If the Microphone is

left off-cradle for too long then the radio may sound a continuous alert tone until it is

replaced.

DTMF (if enabled) is only active when the Mic is out of cradle.

The Keypad may NOT be used for quick channel change (e.g. 456#) in this Screen.

5.5.2 Scan-Edit Screen

Press OK and select Scan Edit.

In the Scan-Edit Screen the display shows the

Channel List (excluding Vote and MultiAx channels)

and the Message-Line shows either “Member” or

“Priority”.

Press the and buttons to show channels within

the Scan Group.

Press OK to Add/Delete a channel, or Change the

Priority Channel.

If the and buttons were used to select ADD……

….then this Screen will appear. Press OK to confirm

channel selection and to return to the previous

screen.