User's Manual

SRM9022 ~ PMR MOBILE RADIO USER GUIDE

Alternatively, if the and buttons were used to

select PRIORITY…….

….then this Screen would appear. Press OK to

confirm Priority selection and to return to the previous

screen.

When adding Channels (or changing Priority Channel), press and buttons to

scroll through all available channels, and press OK to make a selection.

Note: “Member” and “Priority” text strings will only be displayed if the channel is a

member of the group.

In all Screens, press Back to return to previous Screen.

5.6 DTMF OPERATION

When DTMF is enabled, DTMF tones can be sent using the Keypad from the Main

Channel Screen. Pressing 0...9, * and # will send the associated tones.

The tone period and gap are set by the programmer.

DTMF can be enabled in several ways:

via the DTMF option in the User-Options sub-menu under the SETUP Menu (refer to

Section 6).

If the DTMF Function is assigned to a F1...6 button, DTMF is enabled when the

button indicator is ON.

5.7 EXTERNAL ALERT

Provision is made to connect an external alerting device to the rear of the radio. The

external alert may be activated when a selcall is received (and cancelled by a

timeout, user intervention or receiving a different selcall).

This function is enabled by software programming. When enabled, the External Alert

feature may be switched On or Off using a Function button.

5.8 AUXILIARY OUTPUT

Provision is made for connection to an Auxiliary Output on the rear of the radio. This

output is enabled by software programming and can be used to activate an external

device. When enabled, the function is toggled On/Off using a Function button.