User's Manual

SRM9022 ~ PMR MOBILE RADIO USER GUIDE

7. SPECIAL FUNCTION BUTTONS

This section lists Functions that may be programmed to the F1, F2, F3, F4, F5 or F6

buttons.

Consult your TMC Radio Dealer for which functions have been programmed in to

your radio.

7.1 MONITOR

Opens/Closes the audio (signalling) mute.

Only valid on Non-Community Repeater type channels and/or Closed Selcall

channels without Receiver Lock-out programmed.

7.2 SQUELCH DEFEAT

Opens/Closes the squelch (carrier) mute.

7.3 RESET

Closes the audio (signalling) mute on closed Selcall Channels.

7.4 S

CAN

Activates Scanning, refer to Section 5.5.

7.5 A

UXILIARY

Toggles the external output, refer to Section 5.8.

7.6 SEND-2

Sends a specific selcall sequence.

7.7 TRANSPOND

Enables/Disables Individual Call Acknowledge.

7.8 CTCSS

Defeats the CTCSS mute on the channel

Only valid on Non-Community Repeater type channels and/or Open Selcall channels.

7.9 MUTE

Provides direct access to the Mute Setup screen (refer to Section 6.1.2) and allows

the user to change the mute level from that screen.

7.10 E

XTERNAL ALERT

Enables/Disables control of External Output via Selcall Decodes, refer to Section 5.4.

7.11 G

OTO CHAN A, B, C, D

Selects predefined Channel A, B, C or D, and (may) return on the second press.

The Defined Channel may be redefined if held for approximately 2 seconds.

7.12 SPECIAL ENC 1…8

Sends Special Encode 1, 2, … 8

7.13 ALARM

Put the mobile into Alarm mode.

7.14 REPEATER DEFEAT

Allows the radio to transmit on the reverse frequency on a Repeater Channel.

When the button is pressed again (or the Channel is changed) the transmit frequency

reverts to the original setting.