User's Manual

SRM9030 ~ PMR Mobile Radio User Guide

5.4 SELCALL FUNCTIONS

5.4.1 Receiving a Selcall

A number of different options can be set up by your dealer to sound various

alert tones when a selcall is received. Consult your dealer for a detailed

explanation of your radios set up.

When a Selcall is received the radio may respond by:

• Showing a flashing or solid icon to indicate that the radio has been

Called or is On-call,

• Sounding an Alert tone, or

• Displaying the Name of the caller (if it exists in the Phonebook) or the

numerical identity of the caller (if unknown) in the Name field.

Pressing PTT and/or removing the Microphone from its Cradle will change the

state of the icon, stop the Alert tone and enable the speaker audio.

Replacing the Microphone back into its Cradle will clear the icon (and/or

mute the speaker).

5.4.2 Sending a Selcall

Refer to sections on Phonebook Screen (page 7) and Status Screen (page 8)

for methods of sending a Selcall.

5.4.3 Other Selcall Functions

The SRM9030 has several other functions that affect how the radio operates

with received signals or selcalls. These are described later in this booklet

under the headings:

Monitor/Reset (refer to Section 7.1)

Reset (refer to Section 7.3)

Transpond Enable (refer to Section 7.7)

Send-1, Send-2 (refer to Section 7.6)

Special Encode1...8 (refer to Section 7.12)