User's Manual

SRM9022 ~ PMR MOBILE RADIO USER GUIDE
© TMC Radio 2007 page 9 TNM-U-E-0063 Issue 2
3. MENU SYSTEM
The SRM9022 radio software uses a programmed Menu structure to enable the
operator to access the radio options. The structure of the menu can be programmed
to meet the specific needs of individual customers.
Figure 3-1 (overleaf) illustrates the menu structure of the radio. Note that the order
and presence of each menu is determined by the configuration of the radio
programmed by the Field Programmer.
There are setup sub-menus that provide access to radio setup parameters.
Possible Menu entries are:
• Phone Book
• Status
• Stored Calls
• Mute Adjust
• Send Message
• Setup
• Phone Book Edit
• Contrast
• Alert Volume
• Radio Information
• Mode Selection
• Received Signal Strength Indication (RSSI)
To assist the user in menu key selection, a soft menu label will often appear above
the function keys. The label shows the user the current function for that key which
may change between different menus.
Programming of menus is a configuration task normally performed by the system
manager using FPP software.
3.1 MENU NAVIGATION
The “M” key is generally used to select Menu mode from the main Channel Screen.
Once in Menu mode, the ▲ and ▼ keys cycle through the menus.
To exit Menu mode, press the “M” key again or the Menu timeout will exit
automatically. Generally, pressing “M” key while in a menu backs up to the next
highest level of menu and the “OK” button selects the function.
The ▲ and ▼ keys are generally used to navigate through a list of options such as
channels, or increase/decrease a value.