Service Manual

SRM9000 SERIES SERVICE MANUAL

1.5 SOFTWARE VERSIONS AND NAMING

There are various associated items of Software (SW) required for the SRM9000 radio and programmer to

operate. This section simply defines the naming rules of the SW files to allow identification and conformity.

This allows different versions of SW to be distributed and co-exist without confusion.

The SRM9000 Transceiver has three items of SW for digital and analogue PMR, Trunking and Alignment.

The 9022/9025 Controller Mic/Handsets have one SW file for their PIC’s and 9030 Control Head has two

SW files for its Flash and EEPROM.

1.5.1 Filename Structure

Basically the Filename Structure is defined as follows:

• 2 character Application code

• 2 or 3 character SW Type code

• 3 character version number

• File Extension as required.

eg. 99tm533.bin

99p_533.bin

99s_533.bin

99cf101.hex

99ce101.hex

1.5.2 Application Code

This identifies the application the SW was initially designed for:

9k Standard SRM9000 Pre-Rev 9 Software

99 Standard SRM9000 Rev 9 Software

ak SRM9000 Pre-Rev 9 Software applicable for SRP9022

a9 SRM9000 Rev 9 Software applicable for SRP9022

rw Specific SW for Raywood Taxi Applications

1.5.3 Software Type Code

This identifies different types of SW within an application.

s_ Startup

p_ Standard PMR. DMAP or No option board

p_s PMR with Scrambler/Discriminator option board

p_g PMR with Direct GPS

p_a PMR with ASI Map27option board

p_u PMR with ASI SUP option board

p_q PMR with ASI-G Map27option board

a__ 9022 Standard PMR. DMAP or No option board

a_s 9022 PMR with Scrambler/Discriminator option board

a_g 9022 PMR with Direct GPS