User's Manual

SRM9030 ~ PMR Mobile Radio User Guide

1. INTRODUCTION

1.1 OVERVIEW

The SRM9000 Series Radios are versatile Digital Signal Processor (DSP)

controlled, two-way mobile radios. The SRM9000 Series is available in a

number of frequency bands and versions for specific applications. This manual

describes the operation of the SRM9030 PMR Alphanumeric Display variant.

The radio consists of a Transceiver unit that may be mounted in the vehicle

boot or under a seat, and an Alphanumeric Control Unit, which is designed to

mount on the vehicle console or within view and reach of the driver. A

microphone and speaker connected to the radio provide the audio interface.

The radio is software programmable and it can be customised to the

operational requirements of your particular fleet. Your TMC Radio

representative can help in programming your radio facilities to meet your

present and future requirements.

This guide describes the facilities that are currently available and can be

programmed into the SRM9030.

1.2 INSTALLATION

As the installation of your SRM9030 Radio is a technical and possibly

hazardous operation, we recommend that it is installed and set up for use by

your dealer or an authorised installer. However, if you need information

regarding the correct procedures for installation, please refer to the SRM9000

Series Installation Instructions supplied with the radio.