User's Manual

P25 - SRM9022 RADIO – OPERATING INSTRUCTIONS
© TMC Radio 2007 page 43 TNM-U-E-0055 Issue 2.1a
5.5.1 Stored Calls Screen
This screen displays the received individual call records one by one, starting with the most
recently received call record.
On the first line under the menu label, either the name of the caller from the phone book or
the user ID is shown. The user ID is displayed if the ID is not known to the phone book.
The next line has the zone that call was received on and the line below shows the channel.
If stored calls are empty, NO RECORD is displayed.
The ▼ and ▲ keys can be used to step through the stored calls. An error beep will sound if
there are no more call records.
A “Reset” function key press (if configured) takes the radio back to the default screen
display.
The “Menu” or “Back” key returns to Menu screen. When “OK” key is pressed, a pop up
menu is displayed so that the message can be deleted or party called back.
5.5.2 Received Call Pop-Up Menu
The selections are:
• DELETE:
deletes the call record.
• CALL: calls back the caller (set individual call to the caller)
• CANCEL: cancels the action selection.
The selection is made with the▼ and ▲ keys.
The “
Menu
” or “
Back
” key returns to Stored Calls screen.
A “Reset” function key press (if configured) takes the radio back to the default screen
display.
If “
DELETE
” is selected, pressing “
OK
” removes the selected call record (being viewed) from
the list. The radio returns to the Stored Calls Screen with the next record being displayed.
If “
CANCEL
” is selected, the
Stored Calls
screen is displayed.