User's Manual

P25 - SRM9030 RADIO – OPERATING INSTRUCTIONS
© TMC Radio 2007 page 53 TNM-U-E-0074 Issue 2.0a
5.5.2 Received Call Pop-Up Menu
The selections are:
•
DELETE:
deletes the call record.
• CALL: calls back the caller (set individual call to the caller)
• CANCEL: cancels the action selection.
The selection is made with the▼ and ▲ keys.
The “
Menu
” or “
Back
” key returns to Stored Calls screen.
A “Reset” function key press (if configured) takes the radio back to the default screen
display.
If “DELETE” is selected, pressing “OK” removes the selected call record (being viewed) from
the list. The radio returns to the Stored Calls Screen with the next record being displayed.
If “
CANCEL
” is selected, the
Stored Calls
screen is displayed.
If “CALL” is selected, pressing “OK” sets the radio to individual calling mode with the ID of
the stored call. A subsequent PTT within the configured time interval will send an individual
call to the ID of the stored call.
5.6 T
RANSMITTING
To avoid interfering with other users of the channel, listen first, or check that the “speaker”
icon is not present, to ensure no transmissions are occurring.
If the speaker icon is shown, there are transmissions present on the channel and the user
should not transmit. The radio may be programmed to prevent transmission on a busy
channel if required.
Hold the microphone a few centimetres from the mouth, press the “Press to talk” (PTT)
switch and note that the TX-LED is RED. Wait for the grant tone, and then speak clearly
across the face of the microphone in a normal conversational manner.
In most systems it is important to wait a short time between pressing PTT and commencing
to speak. This ensures that the path is properly established and avoids lost or distorted
speech.
Use the correct operating procedure and keep transmissions short.
Release the PTT switch as soon as the message is finished.