User's Manual

SRM9000X8 800MHz SERVICE MANUAL

For

Software loaded in the radio

, information can be read from the Transceiver and displayed via the

Programmer function:

Options : Radio_Information

SRM9030 Control Head SW

can be displayed on the Control Head by holding the ‘3’ button down when the radio

is switched on.

SRM9022 Handset SW

can be displayed by pressing the top side button when the radio is

switched on.

1.4.7

Automatic Version Upgrade Prompting

When a configuration is downloaded to the Transceiver, the Programmer performs a brief check on the SW

currently installed in the radio. If a later version of SW exists (on PC hard-disk) then the Programmer will prompt

the user with the following message:

NOTE. As early versions of FPP cannot recognise a more recent revision of the radio, it is important that the latest

FPP version is downloaded from http://www.tmcradio.com.

YES

is selected, the Transceiver Radio code is updated before the new configuration is downloaded.

is selected, only

the configuration is downloaded.

This process also updates the Startup code to ensure it is compatible with the loaded PMR code.

Note : If the …\SRM9000\FPP\RadioSW folder contains no files, then the above check will not be performed.