User's Manual

SRM9030-P25 RADIO – OPERATING INSTRUCTIONS

4. MENU SCREENS

4.1 C

HANNEL

CREEN

SPECIAL OPS

Zone 5

The Channel Screen shows the current channel and allows channel selection.

The

Channel Name

(top line)

shows the text associated with the currently selected radio

channel.

The

Zone Name

(middle) shows the text associated with the currently selected radio zone.

The

RSSI Bars

(left) indicate the signal strength of the current channel.

Pressing the “

Menu”

key enters the

mode.

The lower part of the screen is reserved for icons.

Radio channels may be configured with the Field Programmer as specific frequencies or as

auto scan types. When an auto scan channel is selected, it will immediately go into scan

mode. Selecting another non-autoscan channel will stop the scan.

If a radio channel is defined as a P25 Conventional Digital Channel, it will only receive P25

digital signals.

If a radio channel is defined as an Analogue FM channel, it will receive both P25 Digital* and

Analogue FM signals.

A radio channel defined as a P25 Trunked network will automatically start searching for the

pre-programmed network, and only receive signals from that network once it has service.

* While in Analogue mode, all unencrypted digital P25 traffic will be heard regardless of NAC

or Talkgroup.