User's Manual

SRM9030-P25 RADIO – OPERATING INSTRUCTIONS
© ComGroup Australia 2010 page 22 TNM-U-E-0094 Issue 1.2
4.2.4 Phonebook Menu
When “ Phone Book ” is selected from the menu screen, the Phone Book Screen is shown.
From this screen, it is possible to view the of all phone entries in the phone book.
The second line shows the name of the selected phone book entry.
The third line shows the unit identifier of the phone book entry. This is the P25 ID that the
radio will call.
The fourth line shows the IP address associated with the phone book entry. IP addresses
are used for data calls.
Phone book entries may be selected with the
▼ and ▲ keys.
A “Reset” function key press (if configured) takes the radio back to the default screen display.
When the “
Back ” key or “ Menu ” is pressed, the radio returns to the Menu screen.
4.2.4.1 Making an Individual Call
When “ PTT ” key is pressed:
•
The radio is changed to individual call mode (individual call to the unit identifier of the
selected phone entry). The individual call icon is displayed.
•
If the radio is already in individual call mode addressed to a different unit, the
destination unit ID shall be replaced by that of the newly selected phone entry.
• The radio will remain in individual call mode until the inactivity timeout has elapsed,
ie. No PTT or signal received for the Field Programmer set time period (typically 10
seconds).
• The radio will return to the default screen.
4.2.4.2 Making an Individual Call with Call Alert
When the “OK” key is pressed with the Phone Book entry displayed:
A Call Alert is sent to the displayed ID.
The called radio will sound a Call Alert.