User's Guide

SRP9100 RADIO P25 – OPERATING INSTRUCTIONS
If “CANCEL” is selected, the Stored Calls screen is displayed.
If “CALL” is selected, pressing “OK” sets the radio to individual calling mode with the ID of
the stored call. A subsequent PTT within the configured time interval will send an individual
call to the ID of the stored call.
4.2.15 Messages
A radio unit can receive and transmit predefined short messages and text messages with
another radio unit on a digital channel.
Messages received are stored in radio memory. They can be viewed and deleted as
required.
If there are unread messages stored in the radio, the envelope icon on the default screen will
flash.
If there are messages in the radio that have all been read, a steady envelope icon is shown
on the default screen.
If there are no messages in the radio, the envelope icon will not appear on the default
screen.
To view/delete/send messages, go to the Menu selection and choose the “Messages” menu.
When “Messages” is selected from the menu screen with “OK”, a pop-up screen will appear.
4.2.15.1 Messages Selection Pop-Up Menu
The pop-up selections are:
• VIEW: view received messages.
• SMSG: Short Message. The radio can be programmed with a list of predefined
messages. Choosing SMsg shows a list of predefined messages, which can be sent
as a short message to another radio unit. Only applicable when a digital channel is
selected.
© TMC Radio 2007 Page 31 TNM-U-E-0073 1.1b