Service Manual

A1
Page
5.13
6 ~ CIRCUIT DIAGRAMS
TNM-M-E-0012 Issue 1.23
5.2.3.8 Programming
When all channels have been aligned the radio is programmed with the new alignment data:
1.
Select
Align
and choose
Write Alignment
.
2. A warning message is displayed.
3.
Choose
Y
es
.
New alignment data is written to the radio.
5.2.3.9 Customers Radio Configuration Data
If the Customers Radio Personality Data was saved as a separate file, use the FPP Programmer to write this
data to the radio.